For those of you who have a laptop without a CD or DVD-ROM as the latter are circulating right now, of course install a new OS or just reinstall is very bothered. Because in general Software OS installation is always in the DVD format. Well, there is an effective solution to overcome them: just move the bootable DVD functions to the USB Flashdisk, so your flash become a media booting drive.
Installing Windows via USB flash, it is also a lot of advantages compared to the CD or DVD disk, we do not have to worry about CDs or DVDs that are not readable, such as: CD or DVD is scratched, sometimes difficult and failed in the middle of installing Windows process. While the flash such cases it will not happen.
I will show you manually install the Windows 7 (or other OS) via USB FlashDisk.
Before we start, we need to be prepared are: one Flashdisk with 4GB capacity or more (because Windows 7 at least took place at 2.7 Gb) and a copy of OS.
The steps set into a bootable flash media are:
- Plug your flash on USB hole.
- Click the Start window, in the phrase "search programs or files" replace with "cmd" without quotes, then click OK.
- Type diskpart and press ENTER.
- Type list disk, press ENTER and choose which one is your USB flash, please becarefull do not wrong choice. If you only have one hard drive, the USB flashdisk is disk1.
- Type select disk 1 and press ENTER.
- Type clean and press ENTER.
- Type create partition primary and then press ENTER.
- Type select partition 1 and press ENTER
- Type active and press ENTER.
- Type format fs = fat32 and press ENTER
- Type assign and press ENTER
- Type exit and press ENTER.
- Insert the DVD disc windows 7 and copy all the contents of the DVD was the last to your USB flash disc.
- Boot your computer with flash position is still stuck, then go into bios and do the bios settings on your computer, choose boot with USB flash settings.
No comments:
Post a Comment